Mitsubishi Electric MELSEC iQ-F Series, User Manual

Page: 73 / 190

5 INSTALLATION
5.5 Connection Methods for CPU Module and Extension Devices
71
5
5.5
Connection Methods for CPU Module and
Extension Devices
This section explains the connection methods for extension devices.
Connection of extension devices
The connection method varies depending on the combination of products, i.e., the CPU module, expansion board, expansion
adapters, and extension modules.
The connection methods are explained with the following configuration example.
For connection method for FX5-1PSU-5V, refer to MELSEC iQ-F FX5-1PSU-5V HARDWARE MANUAL.
Ex.
Connection method A - connection of an expansion board
This subsection explains how to connect the expansion board to the CPU module.
1.
Remove the expansion board connector cover from
the front face of the CPU module.
2.
Connect the expansion board to the expansion
board connector (A in the right figure).
3.
Fix the expansion board (C in the right figure) with
provided M3 tapping screws (B in the right figure) to
the CPU module.
• Tightening torque: 0.3 to 0.6N
⋅
m
Connection
method C
Connection
method D
Expansion
board
Expansion
adapter
Connection
method B
Connection
method A
Connection
method D
Connection
method F
Connection
method E
FX5UJ
CPU module
Extension module
(extension
cable type)
Extension
module
(extension
cable type)
Extension
module
(extension
connector type)
Extended
extension
cable
Connector
conversion
adapter
Connector
conversion
module
1
Expansion board
connector cover
A 2
B
C