Mitsubishi Electric Melsec A Series, User Manual

Page: 128 / 150

115
Table 6.3 Error Code List for AnUCPU (Continue)
Error
Massage
Error
Code
(D9008)
Detailed
Error
Code
(D9091)
CPU
States
Error and Cause Corrective Action
131 The same device
number is used at two
or more steps for the
pointers (P) and
interrupt pointers (I)
used as labels to be
specified at the head of
jump destination. Eliminate the same
pointer numbers
provided at the head of
jump destination. "CAN'T
EXECUTE
(P)"
(Checked
at
execution
of
instruction.)
13
132
STOP
Label of the pointer (P)
specified in the
CJ , SCJ ,
CALL ,
CALLP , JMP ,
LEDA/B FCALL
or
LEDA/B BREAK
instruction is not
provided before the
END instruction.
Read the error step
using a peripheral
device, check contents
and insert a jump
destination pointer (P).
133
(1) The RET
instruction was
included in the
program and
executed though
the
CALL instruction
was not given.
(2) The NEXT
LEDA/B BREAK
instructions were
included in the
program and
executed though
the
FOR instruction
was not given.
(1) Read the error step
using a peripheral
device, check
contents and correct
program of the step.
(2) Reduce the number
of nesting levels of
the CALL ,
CALLP and
FOR instructions
to 5 or less.