16 Input/Output Extension Blocks
276
FX
3G
Series Programmable Controllers
User's Manual - Hardware Edition
16.10 FX2N-8EYR, FX2N-16EYR (Relay Output)
16.10 FX
2N
-8EYR, FX
2N
-16EYR (Relay Output)
16.10.1 Product specifications
The generic specifications are identical to the main unit specifications.
→
Refer to Section 4.1 for generic specifications.
For external wiring, refer to the following chapters.
→
Refer to Chapter 12 for output wiring.
1. Power supply specifications
2. Weight and Other specifications (External dimensions are described later.)
3. Output specifications (Relay output type)
Item
FX
2N
-8EYR
FX
2N
-16EYR
Product type
FX
2N
extension block
Rated voltage
24V DC (supplied from main unit and input/output powered extension unit)
Item
FX
2N
-8EYR
FX
2N
-16EYR
MASS (Weight)
Approx. 0.2kg (0.44lbs)
Approx. 0.3kg (0.66lbs)
Other
•
The extension cable is already connected to the extension block.
•
Accessories: Label for indication of input/output number
•
The DIN46277 rail (width: 35 mm (1.38")) or direct installation.
Item
FX
2N
-8EYR
FX
2N
-16EYR
Output Points
8 points
16 points
Connection type
Vertical terminal block (M3 screws)
Output type
Relay
External power supply
250V AC 30V DC or less
Output circuit insulation
Mechanical insulation
Indication of output operation
Supplying power to the relay coil will light the LED indicator lamp on panel.
Max. load
Resistance load
2A/point
The total resistance load current per common should be as follows:
•
4 output points/common: 8A or less
•
8 output points/common: 8A or less
Inductive load
80VA
→
For the product life, refer to Subsection 14.4.3.
→
For cautions on external wiring, refer to Subsection 12.1.3.
Open circuit leakage current
-
Min. load
5V DC, 2mA (reference values)
Response time
OFF ON
Approx. 10ms
ON OFF
Approx. 10ms
Output circuit configuration
A common number applies to the of [COM ].
Load
DC power
supply
AC power
supply
Fuse
Y
COM
Fuse
Y
COM
Load
