17
FX
3G
Series Programmable Controllers
User's Manual - Hardware Edition
Standards
Requirement for Compliance with LVD directive
The following products have shown compliance through direct testing (of the identified standards below) and
design analysis (through the creation of a technical construction file) to the European Directive for Low
Voltage (2014/35/EU) when used as directed by the appropriate documentation.
For the products above, PLCs manufactured
before May 31st, 2018 are compliant with EN61131-2: 2007,
PLCs manufactured after June 1st, 2018 are compliant with EN61131-2: 2007 and EN61010-2-201: 2013.
*1
*1.
For some models, PLCs manufactured in March, 2018 are compliant with LVD directive successively.
For the products above, PLCs manufactured
before March 31st, 2002 are compliant with IEC1010-1
from April 1st, 2002 to April 30th, 2006 are compliant with EN61131-2:1994+A11:1996+A12:2000
from May 1st, 2006 to April 30th, 2018 are compliant with EN61131-2:2007
after May 1st, 2018 are compliant with EN61131-2: 2007 and EN61010-2-201: 2013.
*1
*1.
For some models, PLCs manufactured in March, 2018 are compliant with LVD directive successively.
Type :
Programmable Controller (Open Type Equipment)
Models :
MELSEC FX
3G
series manufactured
from November 1st, 2008
FX
3G
-
MT/ES
Where
indicates:14,24,40,60
from December 1st, 2008
FX
3G
-
MR/ES
Where
indicates:14,24,40,60
from March 1st, 2009
FX
3G
-
MT/ESS
Where
indicates:14,24,40,60
from December 1st, 2009
FX
3G
-
MR/DS
Where
indicates:14,24,40,60
Standard
Remark
EN61131-2:2007 Programmable controllers
- Equipment requirements and tests
The equipment has been assessed as a component for fitting in a suitable
control box which meets the requirements of EN61131-2:2007
EN61010-2-201:2013 Safety of electrical equipment for
measurement, control, and test
The equipment has been assessed as a component for fitting in a suitable
control box which meets the requirements of EN61010-2-201:2013
Models :
MELSEC FX
2N
series manufactured
from July 1st, 1997
FX
2N
-
ER-ES/UL
FX
2N
-
ET-ESS/UL
Where
indicates:32,48
FX
2N
-16EYR-ES/UL
from April 1st, 1998
FX
2N
-48ER-DS
from August 1st, 1998
FX
2N
-48ER-UA1/UL
from August 1st, 2005
FX
2N
-8ER-ES/UL
FX
2N
-8EYR-ES/UL
from September 1st, 2010 FX
2N
-8EYR-S-ES/UL
Standard
Remark
IEC1010-1:1990 Safety requirements for electrical
/A1:1992 equipment for measurement, control,
and laboratory use
- General requirements
The equipment has been assessed as a component for fitting in a
suitable control box which meets the requirements of IEC 1010-
1:1990+A1:1992
EN61131-2:1994 Programmable controllers
/A11:1996 - Equipment requirements and tests
/A12:2000
The equipment has been assessed as a component for fitting in a
suitable control box which meets the requirements of EN61131-
2:1994+A11:1996+A12:2000
EN61131-2:2007 Programmable controllers
- Equipment requirements and tests
The equipment has been assessed as a component for fitting in a
suitable control box which meets the requirements of EN61131-
2:2007
EN61010-2-201:2013 Safety of electrical equipment for
measurement, control, and test
The equipment has been assessed as a component for fitting in a
suitable control box which meets the requirements of EN61010-2-201:
2013
