Mitsubishi Electric FREQROL-CS80, Manual

Page: 11 / 40

11
3
St
a
n
d
ar
d
Sp
e
cif
ic
a
tio
n
s
 Rating
 Three-phase 400 V class.
∗1
The applicable motor capacity indicated is the maximum capacity applicable for use of the Mitsubishi Electric 4-pole standard motor.
∗2 The rated output capacity at an output voltage of 440 V.
∗3 When using the inverter in a surrounding air temperature of 50°C, the rated current is decreased to the value shown in the parentheses.
∗4
The percentage of the overload current rating is the ratio of the overload current to the inverter's rated output current. For prolonged use, allow time for the
inverter and motor to return to or fall below the temperatures under 100% load.
∗5 The maximum output voltage does not exceed the power supply voltage. The maximum output voltage can be changed within the setting range. However,
the maximum point of the voltage waveform at the inverter output side is the power supply voltage multiplied by about .
∗6 The power supply capacity is the value at the rated output current. The input power impedances (including those of the input reactor and cables) affect the
value.
 Single-phase 200 V class.
∗1 The applicable motor capacity indicated is the maximum capacity applicable for use of the Mitsubishi Electric 4-pole standard motor.
∗2 The rated output capacity at an output voltage of 230 V.
∗3
When using the inverter in a surrounding air temperature of 50°C, the rated current is decreased to the value shown in the parentheses.
∗4
The percentage of the overload current rating is the ratio of the overload current to the inverter's rated output current. For repeated duty, allow time for the
inverter and motor to return to or below the temperatures under 100% load. If the automatic restart after instantaneous power failure function (Pr. 57) or
power failure stop function (Pr. 261) is set and power supply voltage is low while load becomes bigger, the bus voltage decreases to power failure detection
level and load of 100% or more may not be available.
∗5
The maximum output voltage does not exceed the power supply voltage. The maximum output voltage can be changed within the setting range. However,
the maximum point of the voltage waveform at the inverter output side is the power supply voltage multiplied by about .
∗6 The power supply capacity is the value at the rated output current. The input power impedances (including those of the input reactor and cables) affect the
value.
Model FR-CS84-[] 012 022 036 050 080 120 160 230 295
Applicable motor capacity (kW)
∗1
0.4 0.75 1.5 2.2 3.7 5.5 7.5 11 15
Ou
tp
u
t
Rated capacity (kVA)
∗2
0.9 1.7 2.7 3.8 6.1 9.1 12.2 17.5 22.5
Rated current (A)
∗3
1.2
(1.0) 2.2
(1.9) 3.6
(3.1) 5.0
(4.3) 8.0
(6.8) 12.0
(10.2) 16.0
(13.6) 23.0
(19.6) 29.5
(25.1)
Overload current rating
∗4
150% 60 s, 200% 0.5 s (inverse-time characteristics).
Rated voltage
∗5
Three-phase 380 to 480 V.
Power
sup
p
ly
Rated input AC voltage/frequency Three-phase 380 to 480 V, 50/60 Hz.
Permissible AC voltage fluctuation 325 to 528 V, 50/60 Hz.
Permissible frequency fluctuation ±5%
Power supply capacity (kVA)
∗6
1.5 2.5 4.5 5.5 9.5 12.0 17.0 20.0 28.0
Protective structure (IEC 60529) Open type (IP20).
Cooling system Natural. Forced air.
Approx. mass (kg) 0.6 0.6 0.9 0.9 1.4 1.9 1.9 3.5 3.5
Model FR-CS82S-[] 025 042 070 100
Applicable motor capacity (kW)
∗1
0.4 0.75 1.5 2.2
Out
p
ut
Rated capacity (kVA)
∗2
1.0 1.7 2.8 4.0
Rated current (A)
∗3
2.5
(2.1) 4.2
(3.6) 7.0
(6.0) 10.0
(8.5)
Overload current rating
∗4
150% 60 s, 200% 0.5 s (inverse-time characteristics).
Rated voltage
∗5
Three-phase 200 to 240 V
P
o
wer supply
Rated input AC voltage/frequency Single-phase 200 to 240 V, 50/60 Hz
Permissible AC voltage fluctuation 170 to 264 V, 50/60 Hz
Permissible frequency fluctuation ±5%
Power supply capacity (kVA)
∗6
1.5 2.3 4.0 5.2
Protective structure (IEC 60529) Open type (IP20).
Cooling system Natural. Forced air.
Approx. mass (kg) 0.6 0.6 1.4 1.4
2
2
Standard Specifications