Mitsubishi Electric FREQROL-CS80, Manual

Page: 17 / 40

17
6
Exp
la
n
ation
of the Oper
atio
n Pan
el
 Basic operation
∗1 The monitor item can be changed.
∗2 For fault history details, refer to the Instruction Manual of the FR-CS80 inverters.
∗3
When there is no fault history, "0" is displayed.
∗4 For the details of operation modes, refer to the Instruction Manual.
∗5 "P. 0" will appear if the MODE key is pressed during parameter setting.
Parameter setting
*5
Fault history
*2*3
Monitor
*1
Operation mode switchover
*4
PU Jog operation mode
Output frequency monitor
(At power-ON)
Output current monitor Output voltage monitor
Parameter setting mode
Display the
present setting
Change the setting.
Parameter write complete
Alternating
(Example)
(Example) (Example) (Example)
Initial value change list
Parameter clear All parameter
clear
Fault history clear
Fault history 1 Fault history Fault history 2 Fault history 8
Blinking Blinking Blinking
External operation mode (At power-ON )
PU operation mode
Group parameter setting
Calibration parameter
Pressing the
MODE key while in
the "P. 0" screen
returns to the
monitor screen.
Pressing the SET key while in any of the screens
above will change to the parameter setting screen.