8
Para
meter
list
25
Changing the parameter setting value on the operation panel
Changing the setting of
Pr.1 Maximum frequency
.
1.
Turning ON the power of the inverter
The operation panel will be in monitor mode.
2.
Changing the operation mode
Press
to change the operation mode. Press
or
to choose the PU operation mode. The [PU] indicator turns ON.
3.
Selecting the parameter setting mode
Press
to choose the parameter setting mode.
4.
Selecting the parameter
Press
or
to show "
" (Pr.1). Press
to read the present set value.
"
" (initial value) will appear.
5.
Changing the setting value
Press
or
to change the set value to "
". Press
to enter the setting. "
" and "
" are
displayed alternately.
NOTE
• If a parameter write condition is not satisfied, a parameter write error appears on the LCD display.
• When
Pr.77 Parameter write selection
= "2 (initial value)", the parameter setting change is available only while the inverter is stopped and
under the PU operation mode. To enable the parameter setting change while the inverter is running or under the operation mode other than PU
operation mode, change the
Pr.77
setting.
• Press
or
to read another parameter.
• Press
twice to show the next parameter.
• Hold
for one second to return the display to the first screen in the monitor mode. (The monitor item initially set in the first
screen is the frequency)
Error indication
Description
Parameter write error
Write error during operation
Calibration error
Mode designation error
Example
Summary of Contents for FREQROL-CS80
Page 1: ...COMPACT SMART INVERTER FREQROL CS80 FACTORY AUTOMATION ...
Page 36: ...36 ...
Page 37: ...37 ...
