Mitsubishi Electric F930GOT-BWD, Operation Manual

Page: 79 / 342

Graphic Operation Terminal GOT-F900 Creation of Display Screens 8
8-21
DRIVE PREPARATION
START
Screen No. 0
LINE 1 DRIVING
Screen No. 1
PLC: X0 = ON
START key: ON
Screen changeover condition
Destination
Screen
Save Current
Screen
1
2
Not effective
Not effective
Setting shared by all screens (Change Screen)
LINE 2 DRIVING
Screen No. 2
Screen changeover
condition
Destination
Screen
Save
Current
Screen
Setting for individual screen(Change Screen)
Screen No. 10
1. PLEASE SELECT LINE 1
OR LINE 2
PLC: X1 = ON
START key: ON
Screen No. 20
Screen No. 11
BOLT
Display screen realized by overlay
No. 1 + No. 10 + No. 20
M3
×
30
LINE 1 DRIVING
PLEASE REPLENISH THE
MATERIAL
MATERIAL REPLENISHMENT
COMPLETE
Display screen realized by overlay
No. 1 + No. 11
LINE 1 DRIVING
MATERIAL REPLENISHMENT
COMPLETE
Touch key No. 0
MENU MENU
Touch key No. 0
1
2
Control Input
Touch key No. 0
Touch key No. 0
Bit Device
X0
X1
Control
Input
Bit Device
Touch
key No. 0
Not
effective
PC
Not
effective
Touch
key No. 0
Not
effective
PC
Not
effective
Touch
key No. 0
Not
effective
0
Not
effective
Screen currently being created
After the switch line is selected, the next screen is displayed when
the START key is pressed (= becomes ON). The registered setting of
screen changeover is shared by all screens.
When the MENU item (START key) is
pressed, screen No. 0 is displayed.
Overlay of three screens: Screen Nos. 10 and 20 overlay screen No. 1.
In this overlay example, line 1 (screen No. 1) is adopted.
Overlay of two screens: Screen No. 11 overlays screen No. 1.
BOLT
M3
×
30
PLEASE REPLENISH THE
MATERIAL