- 18 -
Inner wall of the
light tunnel (mirror)
Moves in the
arrow's direction
when Screw-1 is
tightened.
Moves in the
arrow's direction
when Screw-2 is
tightened.
Hidden part
Inner wall of the
light tunnel (mirror)
Inner wall of the
light tunnel (mirror)
Inner wall of the
light tunnel (mirror)
4. Turn the adjustment screws so that the inside of the light tunnel can be viewed completely as shown in the figure and
conceptual drawing below.
Inadequate adjustment (Inside is partly hidden.)
Adequate adjustment (Inside can be viewed completely.)
Conceptual drawing
5. When you finish aligning the adjustment screws, apply screw lock to them.
6. Remove dust from the DMD chip and assemble the optical unit.
7. Assemble the product and check its operation. When no error is found, the adjustment is completed.
[Note] Following is an enlarged view of the lower right corner of an image displayed after inadequate adjustment. Check every
corner of the displayed image.