- 8 -
2.Removal of the MAIN PCB ASSY
1. Remove the top cover and front ASSY following “1.
Removal of the top cover and front ASSY.”
2. Remove the eight screws (
a
) and one screw (
b
) as
shown in Fig. 2-2-1.
3. Remove the four screws (
a
) as shown in Fig. 2-2-2.
4. Disconnect all the connectors (including the board-to-
board connector) on the MAIN PCB ASSY.
5. Remove the MAIN PCB ASSY as shown in Fig. 2-2-2.
Note:
On the back of the MAIN PCB ASSY, it is connected
with the DMD PCB ASSY by the board-to-board
connector. When assembling the DMD PCB ASSY,
be sure to attach the board-to-board connector
securely.
a
a
a
b
Fig. 2-2-1
a
a
a
a
MAIN PCB ASSY
Board-to-board
connector
Fig. 2-2-2
