EN-27
Installation menu
Off
Installation
Adjust
MENU
Exit
Select
Efficient Mode
Image Reverse
Auto Power On
Auto Keystone
Test Pattern
Language
Reset All
English
Off
Off
Menu Position
Upper Left
OK
Cross Hatch
Efficient Mode
Adjust
MENU
Exit
Select
Lamp Mode
Standard
Auto Power Off
5Min
Standby Mode
Low
OK
ITEM
SETTING
FUNCTION
Efficient Mode
OK
Displays the Efficient Mode menu for the following settings.
Lamp Mode
Standard
Select this option when you want to view images in a well-lit room.
Low
Select to moderate the intensity of the lamp. The operating sound is reduced
and the lamp lifetime becomes longer.
• When this mode is switched, projected images may flicker.
• If this mode is frequently switched, the lamp may be deteriorated.
Standby Mode
Low
Select this option when you don’t use the LAN control, speaker output and
monitor output during power standby. This option disables them and reduces
the power consumption during the power standby.
LAN
Select this option when you control the projector via the LAN during power
standby.
Speaker Out
Select this option when you want to output audio from the speaker during
power standby.
Monitor Out
Select this option when you want to output video signal from the MONITOR
OUT terminal in addition to the audio from the speaker during power standby.
Auto Power Off
Off / 5-60 Min
Selects a desired timer setting until the projector enters the standby mode
when there is no signal input from the source.
Menu Position
5 options
Use this setting to change the position of the menu on the screen.
Image Reverse
Off
Select this setting when you want to view images from the front with the
projector set on the floor.
Mirror
Select this setting when you want to view images from behind the screen with
the projector set on the floor.
Invert
Select this setting when you want to view images from behind the screen with
the projector set at the ceiling.
Mirror Invert
Select this setting when you want to view images from the front with the
projector set at the ceiling.
Auto Power On
Off / On
When this mode is set to On, the lamp is automatically lit when the power
cord is plugged in the wall outlet. Select On when you set the projector at the
ceiling.
• When the lamp is off, the projector is in standby. Use the remote control to
turn on the lamp.
Auto Keystone
Off / On
Select Auto Keystone function.
Test Pattern
Cross Hatch
Select to show the test cross hatch pattern.
White
Select to show the maximum brightness image.
Black
Select to show the minimum brightness image.
Language
18 languages
Selects a desired language for the menu.
Reset All
OK
Resets all menu settings except for Password and Language to the default.
• You can display the Efficient Mode menu also by pressing the EFFICIENT MODE button.
• Regardless of the setting of Lamp Mode in the Installation menu, the Standard lamp mode is activated by default whenever
the projector is turned on. The Lamp Mode is set to either Standard or Low depending on the setting last selected, and you
cannot switch the Lamp Mode in about one minute after the lamp is on.
• When the Standby Mode is set to Speaker Out or Monitor Out, the audio selected with Audio Input in the Audio menu is output
during standby mode. However, no audio is output when the last selected input was HDMI.
• During standby mode, you cannot change the audio input and the volume from the speaker.
• When Standby Mode is set to Speaker Out or Monitor Out, the fans rotate at very low speed during standby after plugging
the power cord (with 5 second high speed rotation at the beginning) and after turning off the lamp. This is to cool down the
projector operating various functions during standby and is not a malfunction. When Standby Mode is set to Low or LAN, the
fans stop during standby.
• Auto Power Off doesn’t function during AV mute.
• To cancel the test pattern, press any button.
Menu operation (continued)
