Mitsubishi Electric DLP UD740U User Manual Download

Page: 50 / 72

EN-50

3. Click the [Exceptions] tab, check the [Remote

Desktop] checkbox and click [OK].



In Windows XP

1. Select [Start]-[Control Panel].
2. Click [Network and Internet Connections].

• When using Classic View, double-click the

Windows Firewall icon and go to step 4.

3. Select [Windows Firewall].

• The “Windows Firewall” window is displayed.

4. Click the [Exceptions] tab, check the [Remote

Desktop] checkbox and click [OK].

Installation of software

Installing Thin Client

Before starting installation, be sure to read “ReadMe.
txt” contained in the CD-ROM.

1. Copy “ThinClient_v200.exe” contained in the

TOOLS folder of CD-ROM to the hard disk of your
computer.

2. Double-click “ThinClient_v200.exe” on the hard

disk, and start up the installer of the Thin Client.
• Follow the on-screen instructions to install the

software.

• When the “Windows Security Alert” window

is displayed during installation, proceed as
follows:
- In Windows XP or Windows Vista, click

[Unblock].

- In Windows 7, click [Allow access].

3. When the installation has been completed, restart

the computer.

When deleting ThinClient (Uninstallation)

1. Select [Start]-[All Programs]-[Thin Client]-[Uninstall

Thin Client].
• Follow the on-screen instructions to uninstall the

software.

Connection

Connect the projector and the computer using a
commercially available LAN cable. Connect a USB
mouse and USB keyboard to the USB-A terminal on
the projector.

Wireless keyboard

and mouse

LAN cable

(option)

Computer

To LAN

terminal

To USB-A

terminal

Important:

• On Thin Client, use both a keyboard and mouse.

We recommend a commercially available wireless
keyboard and wireless mouse intended for a
computer with wireless receiver.

• For wired LAN connection, use a category-5 LAN

cable. Both straight-through and crossover cables
can be used.

• The USB-A terminal on this projector is compatible

with USB 2.0.

• Supported USB devices are standard USB HID

devices with power consumption less than
5V/500mA or wireless LAN modules.

• Some USB wireless LAN adapters cannot be used

depending on the specifications.

• When using a USB hub, you are recommended to

use the one with external power supply.

• Some USB hubs cannot be used depending on the

specifications.

Operation

Selecting a LAN Display input

1. Press the LAN DISP. button on the remote control

or the COMPUTER button on the projector.
• Each time you press the COMPUTER

button, the input source is switched between
Computer1, Computer2, HDMI, LAN Display,
USB Display and PC Less Presentation.

• When the LAN Display input is selected, the

splash screen for LAN Display appears on the
screen.

Advanced display utilities (continued)

Summary of Contents for DLP UD740U









































































Search results

Summary of Contents for DLP UD740U

Reviews:

Related manuals for DLP UD740U

Brands by name

Popular brands

Mitsubishi Electric DLP UD740U, User Manual

Search results

Summary of Contents for DLP UD740U

Reviews:

Related manuals for DLP UD740U

Brands by name

Popular brands