EN-25
Signal menu
Signal
Adjust
MENU
Exit
Select
Adjust
MENU
Exit
Select
Resolution (Memorize)
Fine sync
Computer Input
Overscan
Hold
User
On
Auto
90%
Auto
H. Position
0
V. Position
0
0
Tracking
0
Memory Call
User
Adjust
MENU
Exit
Select
Clamp Width
Shutter (U)
Shutter (L)
Shutter (LS)
Shutter (RS)
Off
1
LPF
0
0
0
0
Clamp Position
1
OK
Execute
Cancel
OK
768
1024
OK
1024 x 768
Resolution (Memorize)
H. Frequency
V. Lines
60.00 kHz
H. Pixels
V. Frequency
60.00 Hz
ITEM
SETTING
FUNCTION
Memory Call
Auto /
Memory1 -
Memory8
Use to select the setting of Resolution (Memorize) already saved. Impossible
to select if no setting has been saved. Auto is selected by default. It
optimizes the signal format automatically depending on the type of video
signal supplied from the computer. Press the ENTER button to clear the
setting already saved.
Resolution (Memorize)
The current resolution is displayed. To change the current setting, press the
ENTER button to display the Resolution (Memorize) menu. The new setting
can be saved to Memory1 - Memory8.
H. Frequency
-
The horizontal frequency of the currently projected video signal is displayed.
V. Frequency
-
The vertical frequency of the currently projected video signal is displayed.
H. Pixels
640-1920
The number of horizontal pixels of the currently projected video signal is
displayed. When you change the current setting, select Execute, and then
press the ENTER button, the image is automatically adjusted according to
the resolution you set. The adjustment result can be saved to Memory1 -
Memory8.
V. Lines
360-1200
The number of vertical pixels of the currently projected video signal is
displayed. When you change the current setting, select Execute, and then
press the ENTER button, the image is automatically adjusted according to
the resolution you set. The adjustment result can be saved to Memory1 -
Memory8.
Execute
OK
Press the ENTER button to start the automatic adjustment. At the completion
of the automatic adjustment, a message is displayed and you can save the
adjustment result to Memory1 - Memory8.
Cancel
OK
The process to change the current resolution is canceled and the Signal
menu is displayed.
H. Position
0-999
Select this setting to adjust the horizontal position of projected images.
V. Position
0-999
Select this setting to adjust the vertical position of projected images.
Fine sync
0-31
Select this setting to eliminate flickering or blurs, if they appear, when you are
viewing projected images.
Tracking
0-2800
Select this setting to eliminate vertical wide stripes, if they appear, when you are
viewing projected images.
Computer Input
Auto
Automatically sets the appropriate setting.
RGB
Select this setting when you connect the projector to high definition video
equipment having R, G, and B output terminals.
YCbCr/YPbPr
Select this setting when you connect the projector to a DVD player or other device
having Y, C
B
, and C
R
(or Y, P
B
, and P
R
) component video output terminals.
Overscan
100%-90%
Use this setting to adjust the display area of projected images.
Hold
Off / On
Use this setting to adjust projected images when flagging occurs in the upper
area of the screen.
User
OK
The Signal-User menu is displayed for the following adjustments.
Clamp Position
1-255
Use this setting to correct solid white or solid black that appears in projected
images.
Clamp Width
1-63
Use this setting to correct solid black that appears in projected images.
LPF
On / Off
Select this setting to enable or disable LPF.
Shutter (U)
0-20
Use this setting to adjust projected images when noise appears in the top
part of the image.
Shutter (L)
0-20
Use to adjust the image when noise appears on the bottom part of the image.
Shutter (LS)
0-20
Use this setting to adjust projected images when noise appears in the left half
of the image.
Shutter (RS)
0-20
Use this setting to adjust projected images when noise appears in the right
half of the image.
Menu operation (continued)
