EN-65
Warning:
• Do not use fl ammable solvents (benzene, thinner, etc.) and fl ammable aerosols when cleaning the projector body
and lens. Flammable substances may ignite causing fi re or breakdown while the light source is illuminating.
Caution:
• Be sure to turn off the light source and unplug the power cord from the wall outlet before you perform any
maintenance on the projector.
• Ask your dealer for annual cleaning of the inside of the projector. If you continue to use the projector with dust
inside, it may result in fi re or malfunction.
Cleaning of the projector and the ventilation slots
Use a soft cloth to clean the projector and the ventilation grilles. When the grilles become dirty, wipe them with a soft
cloth dampened with diluted mild detergent, and then wipe them with a dry cloth.
To protect the surface of the projector from fading or deteriorating:
• Do not spray insecticide on or inside the projector.
• Do not use benzine or thinner to clean it.
• Do not let rubber or plastic materials contact with projector.
Cleaning of the lens
Remove dust or dirt using the commercially available lens care products (such as cleaning paper or cloth for lens and
blower brush).
• Since the lens surface is sensitive, do not scrub it with a solid object or tap on it.
• Do not wipe the lens with lens cleaner or solvent containing alcohol. Doing so may cause wipe marks or peel off
the lens coating and the focus performance may be affected.
• Make sure to clean the lens after the light source is turned off and the lens is cooled suffi ciently.
About the light source
This light source is a consumable and its brightness decreases with the usage time. When the projected images
become too dim, you can ask for a light source replacement. If you want to replace the light source, contact your
dealer.
About the disposal of projector
When you discard the projector, contact your dealer.
Maintenance
