EN-50
3. Click the [Exceptions] tab, check the [Remote
Desktop] checkbox and click [OK].
In Windows XP
1. Select [Start]-[Control Panel].
2. Click [Network and Internet Connections].
• When using Classic View, double-click the
Windows Firewall icon and go to step 4.
3. Select [Windows Firewall].
• The “Windows Firewall” window is displayed.
4. Click the [Exceptions] tab, check the [Remote
Desktop] checkbox and click [OK].
Installation of software
Installing Thin Client
Before starting installation, be sure to read “ReadMe.
txt” contained in the CD-ROM.
1. Copy “ThinClient_v200.exe” contained in the
TOOLS folder of CD-ROM to the hard disk of your
computer.
2. Double-click “ThinClient_v200.exe” on the hard
disk, and start up the installer of the Thin Client.
• Follow the on-screen instructions to install the
software.
• When the “Windows Security Alert” window
is displayed during installation, proceed as
follows:
- In Windows XP or Windows Vista, click
[Unblock].
- In Windows 7, click [Allow access].
3. When the installation has been completed, restart
the computer.
When deleting ThinClient (Uninstallation)
1. Select [Start]-[All Programs]-[Thin Client]-[Uninstall
Thin Client].
• Follow the on-screen instructions to uninstall the
software.
Connection
Connect the projector and the computer using a
commercially available LAN cable. Connect a USB
mouse and USB keyboard to the USB-A terminal on
the projector.
Wireless keyboard
and mouse
LAN cable
(option)
Computer
To LAN
terminal
To USB-A
terminal
Important:
• On Thin Client, use both a keyboard and mouse.
We recommend a commercially available wireless
keyboard and wireless mouse intended for a
computer with a wireless receiver.
• For wired LAN connection, use a category-5 LAN
cable. Both straight-through and crossover cables
can be used.
• The USB-A terminal on this projector is compatible
with USB 2.0.
• Supported USB devices are standard USB HID
devices with power consumption less than
5V/500mA or wireless LAN modules.
• When using a USB hub, you are recommended to
use the one with external power supply.
• Some USB hubs cannot be used depending on the
specifi cations.
Operation
Selecting a LAN DISPLAY input
1. Press the LAN DISP. button on the remote control
or the SOURCE button on the projector, and select
LAN DISPLAY.
• When the LAN DISPLAY input is selected, the
splash screen for LAN DISPLAY appears on the
screen.
Connecting the projector to the computer
For the following operation, use the USB device such
as a mouse or keyboard connected to the projector.
Advanced display utilities (continued)
