EN-19
Projecting images
Preparation:
• Remove the lens cap.
ON
AUTO POSITIION
USB VIEWER
LAN DISP.
COMPUTER
STANDBY
MENU
COLOR.E
ASPECT
3D
ENTER
VIDEO
HDMI
1
2
S-VIDEO
COMPUTER 1, 2 buttons
POWER indicator
LENS SHIFT dial
STATUS indicator
ENTER button
,
,
,
buttons
POWER button
(ON/STANDBY)
,
,
,
buttons
ENTER button
SOURCE button
ON button
HDMI button
STANDBY button
Zoom ring
Focus ring
VIDEO button
S-VIDEO button
1. Confi rm the POWER indicator lights up red.
2. Turn on the power of the connected devices.
3. Press the POWER button.
• It may take a few seconds for the light source to light up.
• Do not cover the lens with the lens cap while the light source is on.
• After the POWER button is pressed, the image may fl icker before the light source becomes
stable. This is not a product malfunction.
4. Adjust the focus by turning the focus ring.
• You are recommended to adjust the focus at the screen center.
5. Select an input source.
• Press the SOURCE button on the projector or the COMPUTER (1 or 2), HDMI, VIDEO or S-VIDEO button on the
remote control that is corresponding to the terminal in use.
• When the SOURCE button is pressed, the SOURCE dialog shown right appears. Press the
or
button to
select an input and press the ENTER button.
• The projector automatically selects the appropriate signal format. The selected signal format is displayed on
the screen.
• You cannot change the input source while the menu is being displayed.
• Though it may take some time before an image is displayed on the screen depending on the type of the input
signal, such symptom is not a malfunction.
• Images may not be projected in the correct position, depending on the type of the input signal. In such a case,
press the AUTO POSITION button. (The AUTO POSITION only works when the input is COMPUTER (1 or 2).)
(See page 21.)
• When COMPUTER 1 or COMPUTER 2 is chosen as the source, images supplied from the computer may
fl icker. Press the
or
button on the remote control to reduce fl icker, if it occurs. (Fine adjustment)
6. Adjust the image size by turning the zoom ring.
7. Adjust the vertical position of the displayed image by turning the LENS SHIFT dial.
• If necessary, adjust the focus and zoom again.
8. Adjust the position of the projector so that the projector and the screen are perpendicular to each other. (See page 10.)
• When the projector cannot be positioned perpendicularly to the screen, adjust the projection angle. (See page 12.)
Basic operation
SOURCE
COMPUTER1
COMPUTER2
HDMI
VIDEO
S-VIDEO
LAN DISPLAY
USB VIEWER
