Mitsubishi Electric AnyWire NZ2AW1C2AL, User Manual

Page: 76 / 126

74
8 FUNCTIONS
8.2 Function Details
■
Slave module parameter access (To read parameters)
This program reads all parameters of the target slave module by specifying the ID. The device settings of the G(P).RDMSG
instruction in the sample program are as follows.
The following shows a program example.
The following shows the reading parameters of the target slave module using Parameter accessing flag (with handshake)
(RX(n+1)B). The device settings of the G(P).RDMSG instruction in the sample program are as follows.
Device setting in the sample program Setting description Setting value in the sample program
D101 CC-Link station start number 1
D102 Number of send byte 10
D103 Maximum number of receive byte 255
D110 Dedicated instruction execution parameter_1 (fixed value) 2H
D111 Dedicated instruction execution parameter_2 (fixed value) 1504H
D112 Target slave module ID 202H
D113 Dedicated instruction execution parameter_3 (fixed value) 0
D114 Read data size 38
Device setting in the sample program Setting description Setting value in the sample program
D101 CC-Link station start number 1
D102 Number of send byte 10
D103 Maximum number of receive byte 255
D110 Dedicated instruction execution parameter_1 (fixed
value) 2H
D111 Dedicated instruction execution parameter_2 (fixed
value) 1504H
D112 Target slave module ID 202H
Parameter access setting (read)
Program
starting
contact
Dedicated
instruction
starting
contact
Communication
starting contact
Communication
starting contact
Communication
starting contact
Slave module all
parameters reading
Parameter access
completion flag
Dedicated
instruction
starting contact
Parameter access target module ID
specification
CC-Link station number: 1
Number of send byte
Maximum number of receive byte
Dedicated instruction execution
parameter_1 (fixed value)
Dedicated instruction execution
parameter_2 (fixed value)
Target slave module ID
Dedicated instruction execution
parameter_3 (fixed value)
Read data size
G(P).RDMSG instruction
Parameter access request command
for the slave module