Mitsubishi Electric AnyWire NZ2AW1C2AL, User Manual

Page: 48 / 126

46
6 MEMORY MAP
6.2 Lists of Remote Register Areas
When the CC-Link operation mode is Ver.2.00
The following table lists remote register areas when the CC-Link operation mode is Ver.2.00.
Remote registers when 4 stations are occupied
Both input and output of AnyWireASLINK use 32 words.
Set the addresses of slave modules within the range of 0 to 255.
n: Address assigned to the master station in the station number setting
CC-Link side remote register input AnyWireASLINK
side input signal CC-Link side remote register output AnyWireASLINK
side output signal
Decimal Hexadecimal Decimal Hexadecimal
RWrn+0 RWrn+0H 0 to 15 RWwn+0 RWwn+0H 0 to 15
RWrn+1 RWrn+1H 16 to 31 RWwn+1 RWwn+1H 16 to 31
     
RWrn+14 RWrn+EH 224 to 239 RWwn+14 RWwn+EH 224 to 239
RWrn+15 RWrn+FH 240 to 255 RWwn+15 RWwn+FH 240 to 255
RWrn+16 RWr(n+1)0H Latest error code
storage area RWwn+16 RWw(n+1)0H Parameter access
setting
RWrn+17 RWr(n+1)1H Latest error ID storage
area RWwn+17 RWw(n+1)1H Parameter access
target module ID
specification
RWrn+18 RWr(n+1)2H Number of the IDs of
the connected modules RWwn+18 to RWwn+23 RWw(n+1)2H to
RWw(n+1)7H Use prohibited
RWrn+19 RWr(n+1)3H Number of the error IDs
RWrn+20 RWr(n+1)4H Number of the alarm
IDs
RWrn+21 to RWrn+23 RWr(n+1)5H to
RWr(n+1)7H Use prohibited
RWrn+24 RWr(n+1)8H RWwn+24 RWw(n+1)8H Monitor command
specification area
RWrn+25 to RWrn+31 RWr(n+1)9H to
RWr(n+1)FH RWwn+25 to RWwn+31 RWw(n+1)9H to
RWw(n+1)FH Use prohibited