Mitsubishi Electric AnyWire NZ2AW1C2AL, User Manual

Page: 19 / 126

1 OVERVIEW
1.1 Features
17
1
1.1
Features
Seamless connection between two systems
CC-Link and AnyWireASLINK can be seamlessly connected.
CC-Link transmission speed auto-tracking
The transmission speed of the bridge module need not be set by the user since it is automatically determined according to the
transmission speed set in a master station.
Man-hour reduction by built-in terminating resistor
Since the bridge module has a built-in terminating resistor (110

) of CC-Link, a terminating resistor is not necessary even
when the module is used at the end of the CC-Link network. One operation with a switch can enable/disable the built-in
terminating resistor (110

).
iQ Sensor Solution functions
iQ Sensor Solution provides automatic detection of the bridge module connected via CC-Link. It also allows the parameter
setting and monitoring of the slave modules connected to AnyWireASLINK.
1.2
System Configuration of AnyWireASLINK
For the number of connectable slave modules, refer to the following.
 Page 19 Performance Specifications