41 LSH Electric Logsplitter
17
Original Instructions Version August 19
When must the oil be changed?
Change the oil after 150 working hours.
Oil change.
1. Move the log splitter into the start position and pull
out the mains plug.
2. Undo the oil drain screw with dipstick (8) and put
it to one side.
3. Turn the log splitter on the support leg side as
shown in fig. 17 over a 4 litre capacity container to
drain the hydraulic oil off. Recycle carefully! Dispose
of the waste oil in an environmentally friendly
manner!
4. Turn your machine on the motor side as shown
to refill about 2.4 l fresh oil.
5. Clean the oil drain screw with dipstick (8) and
screw it back in to the machine that is still in a
vertical position. Unscrew it again; there should
be an oil film between the two notches.
6. Now screw the oil drain screw with dipstick back
in tightly. Afterwards start splitting without actually
splitting log several times.
7. Check the oil level one last time and top up with a
little oil if required.
MAX
MIN