background image

41 LSH  Electric Logsplitter

11

Original Instructions Version August 19

9.2 Installing the protective guard (L) (enclosed accessories bag b) 

1. Fit the protective guard (L) to the trunk guide plate

(5) and use the enclosed cylindrical screws and

nuts to affix it.

2. Undo the cylindrical screw with washer that is located

on the wheel bracket.

3. Fasten the other end of the strut to the protective

guard using the Phillips head screw and nut. (3)

4. Now guide the open end of the strut (O) between

the washer and the wheel bracket, tighten the cylindrical

screw (4) again firmly.

9.3 Installing the tray table (K + M) (enclosed accessories bag c + d + e)

1. Attach the tray table (K) to the same side as the

protective guard (L). Use two cylindrical screws

and spring washers to affix the table to the log

splitter. (1)

2. Ensure that the table and the protective guard are

level in relation to each other.

3. Undo the screw on the left of the foot.

4. Fasten the other end of the strut to the protective

guard using the Phillips head screw and nut, align

everything and tighten the screws firmly.

1

2

3

4

1

3

2

4

Summary of Contents for 41 LSH

























Reviews: