41 LSH Electric Logsplitter
16
Original Instructions Version August 19
AC motor 230 V/ 50 Hz
Mains voltage 230 Volt / 50 Hz.
• The mains connection and the extension cable have to be three-core cables = P + N + SL. - (1/N/ PE).
• Extension cables must have a minimum cross-section of 1.5 mm².
• Mains fuse protection is 16 A maximum.
12. Cleaning
ATTENTION!
Pull out the power plug before carrying out any cleaning work on the equipment.
We recommend that you clean the equipment immediately after you use it.
Clean the equipment regularly with a damp cloth and some soft soap. Do not use cleaning agents or
solvents; these may be aggressive to the plastic parts in the equipment. Ensure that no water can get
into the interior of the equipment.
13. Transport
The log splitter is equipped with two wheels for easy transport.
The machine can be transported on the wheels at an angle.
Use the transport handle, lift and pull or push.
14. Storage
Store the device and its accessories in a dark, dry and frost-proof place that is inaccessible to children.
The optimum storage temperature is between 5 and 30˚C.
Cover the electrical tool in order to protect it from dust and moisture.
Store the operating manual with the electrical tool.
15. Maintenance
ATTENTION!
Pull out the power plug before carrying out any maintenance work on the equipment.
We recommend:
• The splitting wedge is a wearing part that needs to be sharpened or replaced after wear.
• The combined gripping and controlling device must remain smooth running. Lubricate with a few
drops
of oil when necessary.
• Keep splitting wedge drive clean of dirt, wood shavings, bark, etc.
• Lubricate slide rails with grease.
