MiVoice 6910 IP Phone User Guide for MiVoice Connect
10
•
If you use a wireless headset, put your headset in to the on-hook position.
The LED next to the hardkey stops blinking.
Adjusting the Ring and Listening Volume
To adjust the volume on your phone, use the
keys. The volume settings for the ringer,
handset, speakerphone, and headset are independent, and you can set them as follows:
• Adjust the volume of your phone’s ringer while the phone is on hook.
• Adjust the handset listening volume while the handset is off hook.
• Adjust the speakerphone volume when the LED next to
is illuminated.
• Adjust the headset listening volume when the LED next to
is blinking.
Muting a Call
• To mute a call so that the caller does not hear you, press
CALL MUTED
is displayed on screen. The LED next to the hardkey blinks in red when the mute
is active.
• To unmute a call so that the caller can hear you,
again.
The LED next to the hardkey blinks in red when the mute is active.
Guide to the Icons Displayed on Your Phone
Your 6910 IP phone displays icons for phone status and features. These icons are shown in Table 1.
Note:
The audio mode setting you have selected in the
Settings > Audio> Audio Mode
menu
on the IP phone determines whether the call goes to speakerphone or tto headset operation. For
Note:
When using a wireless headset, if you experience audio problems, ensure that your wireless
headset is configured according to the manufacturer’s instructions. Problems that might result
from improper configuration include the following:
• You cannot hear the dial tone.
• The volume for you or the other party is not loud enough.
• You hear a buzzing or hissing sound.
Note:
Mute does not work during number dial-out.
Table 1: Status Icons
Icon
Description
Missed call (on main screen and in
History)
Inbound call (in History)
Outbound call (in History)
