Miscea Light CCR1S1NCDE, Instruction Manual

Page: 35 / 84

V 20.06
35
English
10. Service
OTHER PROBLEMS
Symptoms Experienced
Possible Problem or Cause Solution
• Faucet not reacting to
anything for a long period
of time. The system is not plugged into a
working power point.
Possible problem with electronics
in faucet head.
Check the system is plugged into a
working power point and switched
on.
Disconnect the miscea system from
the power point. After 10 seconds,
reconnect the miscea system to
the power point. This should reset
the system and resolve any minor
system glitches.
If the problem persists, please
contact miscea GmbH for further
technical assistance.
• A sector does not light prop-
erly when activated. The sector is dirty.
The LED of the sector is broken. Switch the faucet off, and clean the
sector with a damp cloth.
If the problem persists, please
contact miscea GmbH for further
technical assistance.
• Faucet does not respond to
remote control. The software version is outdated. Check the software version of
the miscea LIGHT. The required
information is printed on the serial
number label. Software version
v0.14 or higher is compatible with
the miscea remote control.
If the problem persists, please
contact miscea GmbH for further
technical assistance.
Position of remote control is
incorrect. Be sure to hold the remote control
in the right position to the faucet
head. Please refer to the relevant
pages of the user manual.