Miscea Light CCR1S1NCDE, Instruction Manual

Page: 22 / 84

22
Fig. I Fig. J
5. Use
CAUTION
Always check the temperature before you place your hands in the water stream. Risk of
burning your hands due to hot water.
5.4 *Dispensing liquids
Dispensing soap
• Activate sector 3. The sector shows a
pulsating green light.
• Hold your hand under outlet 4.
*Only available for models with integrated dispenser
5.5 Optional accessories
Remote control
With the remote control, you can change the default settings of the system. The settings include, but are
not limited to the following: dosage, spool cycle, light pulse and resetting. For further information, please
visit our website for the miscea representative in your country.
5.6 Use the remote control with miscea LIGHT systems
The remote control works through the IR sensors of sector (3). Position the remote control over the IR
ring as shown in fig. I and J below. Then the desired settings can be changed. For instructions on how to
change specific settings using the remote control, please refer to the miscea Remote Control instruction
manual.
4
3
ater
miscea
LANG
LIGHT
MEMO
LIQUID 2
SAVE
LIQUID 1
TEMP
DELA Y
BU CKET
DURA TION
BEEP
DEFA ULT
SPOOL
- +
w