- Plug the heater into the mains power, ensuring that the socket matches the voltage and current
of the nameplate on the back of the panel.
- Press the On/off button to switch the heater on and off.
- Use the Up button and Down button to alter the desired temperature. The lowest possible
temperature is 5
o
C, and the highest temperature is 45
o
C.
- Press the Power level button to switch between the four levels of power. This will alter the
intensity of heat emitted from the bar heater.
- Pressing the Timer button will open the timer setting. You can select any time range between 0
hours and 24 hours, in 1-hour increments. When you are happy with your selection, leave the
remote for 5 seconds and your timer setting will apply. The timer icon will appear on the screen
to indicate that it has been applied.
- Pressing the Display button will switch everything off on the screen except for the current
temperature. Pressing it again will switch the display back on. Pressing the Display button twice
quickly will switch everything off on the display except for the heating on icon. To bring the
screen back on, press the Display button once.
- Pressing the Smart Heating button will toggle smart heating on, where the heater will automati-
cally adjust the power level to maintain your temperature. The intelligent heating icon will
appear on the display when this mode is on.
- Pressing the Body Sensor button will switch Body Sensing mode on. The bar heater will now
begin to detect moving objects in the area, and will only operate as long as it can sense move-
ment. If the bar heater does not detect any movement for 2 minutes, it will switch off.
- To lock the heater, press the Set button followed by the Child Lock button. Repeat the process to
unlock the heater.
- Pressing the Set button followed by the Up button will toggle the display between Celsius to
Fahrenheit.
- Pressing the Set button followed by the Down button resets the Wi-Fi setting for the Bar Heater.
Once reset, the Wi-Fi symbol will begin to flash on the display.
- Pressing the Set button followed by the Power Level button will switch the Open Window
Detection mode on. The symbol “WO” will appear on the display when activated. When on, if the
heater detects a drop in ambient temperature of 3 degrees within a 2-minute time frame, it will
switch off as it will assume a window has been opened. Pressing the Set button followed by the
Power Level button again will switch Open Window Detection off.
- Pressing the Set button followed by the Display button displays the current voltage on the
screen.
7
