Thank you for purchasing this Mirrorstone Infrared Heater. In order to get the most out of your
product, please read this manual carefully before use, and keep it in a safe place for future
reference.
Mirrorstone, nor any of its affiliated companies are liable for any damages resulting in misuse of
our heaters, nor any failure to comply with the instructions contained in this manual.
Safety Warnings:
To avoid the heater overheating, please do not cover the heater.
Should any substance or material cover the heater, or go near the heating element inside the
heater, you should stop using it immediately, disconnecting it from the mains power. After
disconnecting the heater from the mains, allow the heater adequate time to cool down. Once the
heater has cooled down, ensure that any foreign material has been cleared from the housing of
the heater, and from the heating element.
If the heater is being used in areas with high salt concentrations, like near the sea for example,
then over time, salt, alkali, crystals and other foreign materials may begin to collect on the
housing of the heater or on the heating element. In the event of this happening, you should stop
using the heater immediately, disconnecting it from the mains power. After disconnecting the
heater from the mains, allow the heater adequate time to cool down. Once the heater has cooled
down, ensure that any foreign material has been cleared from the housing of the heater, and from
the heating element.
Due to the intensity of the heat produced by the heater, the front should be placed a minimum of
1.5 metres away from any flammable materials, such as furniture, pillows, bedding, paper, clothes
and curtains. Ensure that there is enough room either side of where the heater is installed too.
Please ensure that the heater is installed at a minimum height of 1.8 metres.
This heater should only be used with a 220-240V AC power supply. Please use the correct power
supply with this heater for safe usage.
Please note that
all Aurora IR Bar Heaters
must be connected to a
either a
1
0
A mains supply
, 13A
fused spur or standard 3-pin plug socket
. Please consult a qualified electrician before using the
heater for anything other than home/domestic use.
The heater should not be operated or used by vulnerable people such as children, the elderly or
disabled, unless there is an adult present who is responsible for their safety, who can either use
the heater on their behalf, or ensure that the heater is being used on the correct manner by the
vulnerable person.
Do not leave children unattended with the heater.
The fire protection grille cover on the front of the heater is to prevent direct contact with the
heating element. When using the heater, the fire protection grille cover must be in place.
The heater must be grounded adequately, through use of a properly grounded outlet.
2
