GUIDE TO INSTALLATION AND OPERATION
Kaleido-Solo |
67
5.8 General - Remote
You can assign up to 2 actions to each of the optional remote control buttons #1 to #4 (see section 13). Here are the
possibilities:
No Action:
Nothing.
Load User Preset 1 to 5:
Load a previously saved associated preset (see section 5.7).
Reset Loudness:
Reset loudness measurement (see section 5.4.7).
Pause Loudness:
Pause loudness measurement (see section 5.4.7).
Run Loudness:
Run loudness measurement (see section 5.4.7).
Toggle Loudness 1 and 2
This is a special action to toggle between loudness mono meter chart #1 and #2 (see
section 5.5.2).
Toggle Loudness Layout
Cycles between the full screen loudness layout and last active layout (see section 5.5.2).
Loudness Timecode
SOM
Grab the actual time code and place it in the “start of measurement (see section 5.4.8).
Loudness Timecode
EOM
Grab the actual time code and place
it in the “end of measurement (see section 5.4.8).
Loudness Capture Start
Activates (running) the capture automation (see section 5.4.8).
