GUIDE TO INSTALLATION AND OPERATION
26
| Kaleido-Solo
The OSD ALMs indicate which audio pair is being monitored. A grey marker at the bottom of the ALM shows the
selected pair. In this example the audio pair 1-2 is selected. If downmix or off is selected no grey marker is present.
Audio HDMI
Choose whether to send the audio channels selected for monitoring to the HDMI port.
Stereo
Enable stereo audio insertion in HDMI. The selected stereo pair is selected by the Output Stereo
Selection configuration.
5.1 No.1
Enable 5.1 audio insertion in HDMI. The selected channel are define in section 5.4.2.
5.1 No.2
Enable 5.1 audio insertion in HDMI. The selected channel are define in section 5.4.2.
Off
Disable audio insertion in HDMI (this could help with some monitors that do not support
compressed audio).
Volume (Analog)
Adjust the volume of the Kaleido-
Solo‟s analog audio output.
0 dB
The input level is unchanged.
...
-96 dB
The input level is attenuated.
Note that the audio output volume can also be adjusted by pressing the
UP
and
DOWN
keys when you
are in normal operation (i.e. menu not displayed).
Delay (SPDIF/Analog)
Delay can be added to the SPDIF and analog audio outputs, to compensate for a monitor video delay, so that the
audio timing can be matched to the video for lip sync. This control does not affect the audio inserted in the HDMI port.
Using the lip sync test signal (see section 5.2) will help when making this adjustment.
From the
Delay (SPDIF/Analog)
menu, press
ENTER.
The main menu disappears and only the adjustment slider
remains visible. This ensures that the test signal or video that is being used to adjust the audio delay is not obscured
by the menu.
