GUIDE TO INSTALLATION AND OPERATION
Kaleido-Solo |
91
14 Specifications
VIDEO
Signal:
SMPTE-259M-C (270 Mbps)
SMPTE-272M-C (270 Mbps with embedded audio)
SMPTE-292M, SMPTE-299M (HD: 1.485, 1.485/1.001 Gbps)
SMPTE-425 (2.970, 2.970/1.001 Gbps)
Supported formats:
SD: 480i59.94, 576i50
HD: SMPTE-274M: 1080i 50, 59.94, 1080p/PsF 23.98, 24, 25
HD: SMPTE-296M: 720p 50, 59.94
3G: SMPTE-425 level A (mapping 1): 1080p 50, 59.94
3G: SMPTE-425 level B: 1080p 50, 59.94 (Dual Link)
Cable length:
240 m Belden 1694A at 270 Mbps
150 m Belden 1694A at 1.485 Gbps
120 m Belden 1694A at 2.97 Gbps
Return loss:
>15 dB up to 1.5 GHz
>10 dB up to 3 GHz
Jitter:
HD/SD: <0.2 UI as per alignment jitter in SMPTE spec.
3Gbps: <0.3 UI as per alignment jitter in SMPTE spec.
FIBER I/O
SMPTE 297M-2006 compliant
Single receive or transmit or receive/transmit SFP module
Dual receive or transmit modules can be installed, but only one Rx or Tx
channel will be used
HDMI OUTPUT
Connector:
HDMI Type A
Standard:
HDMI 1.3a
Format:
Compliant to EIA/CEA-861-D
ANALOGIC AUDIO OUTPUT
Connector:
3.5 mm stereo Jack
Signal:
2 channels unbalanced analog audio
Level:
2V peak to peak
Impedance:
10 KOhms
SPDIF
Connector:
3.5 mm stereo Jack
Signal:
IEC 60958
Level:
0.5 Vp-p ±20%
Impedance:
75 Ohms unbalanced
Sampling rate:
48 kHz
ETHERNET
Connector:
RJ-45
PROCESSING
Signal path:
8 bits
Processing delay:
1 frame
ELECTRICAL
Voltage range:
6 to 17 VDC
Power:
10 W
