Miranda DENSITE IRD-3811 Manual To Installation And Operation Download | Manualshive

Page: 42 / 60

background image

GUIDE TO INSTALLATION AND OPERATION

38

| IRD-3811

Levels associated with these alarms:

The pulldown lists may contain some or all of the following options:

The alarm makes no contribution (black icon)

The alarm is of minor importance (yellow icon)

The alarm is of major importance (orange icon)

The alarm is of critical importance (red icon)

The alarm exists but has no effect (used for text and composite alarms)

Shortcut: if you click in one of the Set All boxes beside a section heading, you will open a pulldown that
lets you assign a level to all alarms in that section of the column simultaneously.

•

Card LED

This column allows configuration of the contribution of each individual alarm to the state of the Status LED located
on the front panel this card.

•

Overall Alarm

This column allows configuration of the contribution of each individual alarm to the Overall Alarm associated with
this card. The Overall Alarm is shown in the upper left corner of the iControl panel, and also appears at the bottom
of the Status/Name column.

•

GSM Contribution

This column allows configuration of the contribution of each individual alarm to the GSM Alarm Status associated
with this card. GSM is a dynamic register of all iControl system alarms, and is also an alarm provider for external
applications. The possible values for this contribution are related to the Overall alarm contribution:

•

If the Overall alarm contribution is selected as Disabled, the GSM alarm contribution can be set to any available

value

•

If the Overall alarm contribution is selected as any level other than disabled, the GSM contribution is forced to

follow the Overall Alarm.

Once the alarms are configured, you may accept the changes or discard them:

Log Events

iControl maintains a log of alarm events associated with the card. The log is useful for troubleshooting and identifying
event sequences. Click in the checkbox to enable logging of alarm events for each individual alarm.

At the bottom of the window are several other controls:

Overall alarm and GSM contribution follow card LED

Click in the checkbox to force the Overall alarm and GSM contribution to be identical to the Card LED status

•

All Overall alarms for which there is a Card LED alarm will be forced to match the Card LED alarm

•

All Overall Alarms for which there is no Card LED alarm will be forced to Disabled

«
...
40
41
42
43
44
...
»

Summary of Contents for DENSITE IRD-3811





























































Reviews:

No comments

Related manuals for DENSITE IRD-3811

Brand: KAMAI Pages: 8

Brand: XSY Pages: 22

Brand: Y-Solar Pages: 5

Brand: ICP DAS USA Pages: 7

Brand: Omega Engineering Pages: 10

Brand: IBA Pages: 44

Brand: ADDER Pages: 2

Brand: e+p Elektrik Handels Pages: 2

Brand: BK Precision Pages: 23

Sync Converter/Stabilizer SCS 300

Brand: Extron electronics Pages: 1

Brand: CEL-MAR Pages: 16

Brand: OneFex Pages: 37

Brand: ADF Web Pages: 32

L-EM1000 series

Brand: Lacon Pages: 11

Brand: I-Tech Pages: 32

Brand: Guardian Pages: 68

Brand: Kings Audio Pages: 6

Brand: Wavtech Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands