GUIDE TO INSTALLATION AND OPERATION
IRD-3811 |
17
The chart shows what combination of signals results in the application of which input channel to the IRD-3811
inputs:
Applied DC voltage
13 V
18V
Tone
OFF
9.75 MHz / vertical
9.75 MHz / horizontal
ON
10.6 MHz / vertical
10.6 MHz / horizontal
Voltage:
use the pulldown to select the voltage: [OFF, 13V, 18V]
Overload:
the icon is red when overload exists.
Tone:
Use the radio buttons to turn the tone ON or OFF.
Scanning / Tuning Progress
A text message may appear in the window, showing the current or most recent status of the scanning/tuning process.
The Signal Lock status icon will turn green when the tuner has locked onto the signal.
3.4.4 The Conditional Access panel
Conditional Access is only available when a DVB-S2
tuner and a conditional access module are installed.
This panel and its access button will not appear for
IRD-3811s with an ATSC tuner.
CAM status:
The icon is green when a valid CAM card is
detected in the card reader
CAM ID:
CAM card identifier
Manufacturer ID:
Identifies the manufacturer of the CAM
card currently installed
Supported CA Systems:
a list of all the encryption systems
supported by the installed CAM card.
Table:
The table at the center of the panel lists all the programs in
the current channel that are decodable using the installed
CAM card.
Note that programs may or may not be decryptable by the
current CAM, depending on the rights obtained with the
smart card or your contract with the CA or program provider
En:
Click in the box to enable decryption of the selected program.
The current video decoder selection is always selected (shown in blue)
Program Numbers:
Program identification number along with some descriptive text
Figure 3.6 Conditional Access panel
