GUIDE TO INSTALLATION AND OPERATION
IRD-3811 |
7
•
ASI IN –
Connect a DVB-ASI signal conforming to EN 50083-9.
•
ASI OUT –
Outputs the selected input, tuner or DVB-CI
•
HD/SD OUT 1 & 2 –
SDI output, HD or SD
The IRD-3811 provides two identical HD/SD SDI video outputs on BNC connectors. The SDI video signals conform
to the SMPTE 292M and SMPTE 259M-C standards. The output format follows the input format.
•
COMP OUT
–Not used
•
AUDIO OUT (L & R)
– Not used
•
ETH
– Gigabit Ethernet – configurable as input or output
•
RF IN
– connect an RF input appropriate for the installed tuner:
ATSC if the ATSC tuner is installed
DVB-S/S2 RF if the DVB-S2 tuner is installed
2.4 Installation of the Conditional Access Module (CAM)
The Conditional Access Module (CAM) is installed into the IRD-3811 via the front panel.
Depending on the conditional access system in use, the CAM may be in the form of a proprietary module, or in the
form of a carrier plus a smart card.
Both formats plug into the same receptacle on the IRD-3811.
