ENC-1103 SDI to Composite/CAV/RGB Encoder
Guide to Installation and Operation
ENC-1103
Page 5 of 19
Audio Processing tab
Group Detected:
highlights the AES audio groups detected in the
input signal.
CH1,2,3,4,
and
CH 5,6,7,8:
select the AES group to be used as
source for channel 1 to 4 and 5 to 8.
Output tab
These controls allow the selection of the different output formats
and parameters.
OUTPUT FORMAT: NTSC, PAL-M, GBR, YUV, BETACAM
(for
525) or
PAL, GBR, YUV, BETACAM
(for 625): Sets the video
output type.
VIDEO SETUP: O IRE, 7.5 IRE:
In 525 lines operation,
enables
or disables 7.5 IRE units set-up on the output NTSC video signal.
H BLANKING: WIDE, NARROW
: Sets the value of the horizontal
blanking interval.
CLOSE CAPTION:
In 525 lines operation, check the box to enable
7.5 IRE units set-up on line 21 of the output NTSC video signal.
GAIN: -75, -74, …, 74, 75:
Sets the value of the overall output gain;
this gain modifies the amplitude of the analog video signal
amplification.
COLOR BARS:
check the box to select a 75% color bar test signal
at the output.
