LB0261 Rev A 01/2018
© Miramar Labs, Inc. 2018, Confidential Information of Miramar Labs, Inc.
Page 16
Figure 2:
a) Screw on Handpiece
b) Red ring still visible
c) Proper attachment (red ring covered)
Step 2 Turn the System ON
Press the green Standby as shown in Figure 3 to turn the System ON.
Figure 3: Console Standby Button
Step 3 Navigate the Touchscreen GUI
On-screen graphics will guide you through setup and operation. Simply touch the screen with
your finger to navigate the on-screen Graphical User Interface (GUI) as shown in Figure 4.
Touch the right and left arrow buttons (
and
)
on GUI screens to proceed from one
screen/instruction to another.
Figure 4: Touchscreen to navigate the Graphical User Interface (GUI)
Step 4 Add Deionized or Distilled Water if Prompted
Add deionized or distilled water only when prompted by the Touchscreen GUI as shown in
Figure 5. Only use
new deionized or distilled
water when filling the reservoir. The W01
prompt to add more water will appear occasionally.