36
EN
TROUBLESHOOTING
This chapter lists the most common problems linked with the use of the appliance. If you are unable to resolve the problems with the
information given here, please contact your nearest assistance centre.
DISPOSAL
To dispose of the appliance, take it to a demolition centre or an
authorised collection centre.
Before scrapping the appliance, it is necessary to remove and
separate out the following materials, then send them to the
appropriate collection centres in accordance with applicable
environmental hygiene regulations:
• Pad holders or brushes
• Electric and electronic parts*
• Plastic parts
• Metallic parts
(*) In particular, contact your distributor when scrapping electric and
electronic parts.
4
2
3
1
6
2
3
5
1
4.
5HPRYHWKHULQJQXW¿[LQJWKHQR]]OH
)LJ
).
5. Remove the spray nozzle (5), being careful not to lose the washer (6) (
)LJ
).
ATTENTION
: users are advised to always wear protective gloves, to avoid the risk of serious injury to hands.
6. Clean the nozzle under a jet of running water, if necessary remove any impurities.
7. Repeat the operations in reverse order to reassemble all the parts.
36
PROBLEM
POSSIBLE CAUSE
SOLUTION
THE APPLIANCE DOES NOT SWITCH ON
The power cable extension is not connected
to the mains socket.
Check that the plug on the extension cable
has been inserted into the mains supply
socket.
The power cable extension is not connected
to the appliance's power cable.
Check that the plug on the cable of the
appliance has been inserted into the socket
on the extension cable.
7KHHOHFWULFDOVSHFL¿FDWLRQVRIWKHDSSOLDQFH
should
correspond
to
the
electrical
VSHFL¿FDWLRQVRIWKHSRZHUVXSSO\QHWZRUN
0DNHVXUHWKDWWKHHOHFWULFDOVSHFL¿FDWLRQV
of the appliance correspond to the electrical
VSHFL¿FDWLRQVRIWKHSRZHUVXSSO\QHWZRUN
check the technical information on the serial
number plate.
Extension cable damaged.
Check the extension cable is not damaged,
and if it is, replace it.
Overheating of the brush head motor.
Make sure that the thermal breaker on the
back of the handlebar has not tripped. If it
has, wait a few minutes until it has cooled
GRZQWKHQSUHVVWKHVSHFL¿FFLUFXLWEUHDNHU
button to reactivate the power supply and
motor operation
INSUFFICIENT DETERGENT SOLUTION
ON THE PAD HOLDER
The amount of detergent in the solution tank
LVLQVXI¿FLHQWIRUWKHZRUNWKDWQHHGVGRLQJ
Make sure that the amount of detergent
VROXWLRQLQWKHVROXWLRQWDQNLVVXI¿FLHQWIRU
the work to be carried out, and if necessary
¿OOWKHVROXWLRQWDQN
Summary of Contents for ROS 17 ORB 115V
Page 2: ......
Page 3: ...ITALIANO 1 ENGLISH 19 ESPAÑOL 37 FRANÇAIS 55 IT EN ES FR ...
Page 76: ......
