21
EN
IDENTIFICATION DATA
For technical assistance or to request replacement parts, always give the model, the version and serial number written on the
serial number plate.
TECHNICAL DESCRIPTION
INTENDED USE
SAFETY
SERIAL NUMBER PLATE
7KLVDSSOLDQFHKDVEHHQEXLOWIRUWKHSURIHVVLRQDOFOHDQLQJRILQGRRUKDUGYLQ\OÀRRUVWREHFDUULHGRXWE\IROORZLQJWKHLQVWUXFWLRQV
7KHDSSOLDQFHPXVWRQO\EHXVHGIRUWKLVSXUSRVH
7KLVDSSOLDQFHZDVGHVLJQHGDQGEXLOWWREHXVHGE\DTXDOL¿HG
RSHUDWRUWRFOHDQVPRRWKFRPSDFWÀRRULQJLQWKHFRPPHUFLDO
residential and industrial sectors, in proven safety conditions.
Operator cooperation is paramount for accident prevention. No accident prevention programme can be effective without the full
co-operation of the operator who is directly responsible for machine operation. The majority of occupational accidents that happen
both in the workplace or whilst moving are caused by failure to respect the most basic safety rules. An attentive, careful operator is
most effective guarantee against accidents and is fundamental in order to implement any prevention programme.
The serial number plate is located on the lower part of the
machine chassis, and indicates the general characteristics
of the appliance, in particular the appliance's serial number.
The serial number is a very important piece of information
and should always be provided together with any request for
assistance or when purchasing spare parts.
The appliance is only suitable for use in indoor - or at least
covered - areas.
ATTENTION:
The appliance is not suitable for use in the
rain, or under jets of water.
21
TECHNICAL DATA
80
ROS 17
Working width
mm - inch
430-16,9
Number of orbit
orb./min.
1400
Brush head motor rated power
W
1100
Brush head motor nominal voltage
V
115
Brush head motor frequency
Hz
60
Maximum gradient with full load
%
2
Solution tank capacity (optional)
l - gal
15 - 3,96
Rear wheels (diameter / width)
mm - inch
200/50
7,8/1,96
Appliance length
mm - inch
565 - 22,25
height of the appliance to the brush head carter
mm - inch
325 - 12,8
Height of the appliance to the shaft
mm - inch
1160 - 45,7
Appliance width
mm - inch
450 - 17,7
Appliance service weight (without solution tank)
kg - Lb
41 - 90,4
Hand vibration level
m/s
2
1,9
Summary of Contents for ROS 17 ORB 115V
Page 2: ......
Page 3: ...ITALIANO 1 ENGLISH 19 ESPAÑOL 37 FRANÇAIS 55 IT EN ES FR ...
Page 76: ......
