32
EN
At the end of the work, and before carrying out any type of
maintenance, perform the following operations:
1. Disconnect the plug (1) of the power supply cable (2) in the mains
supply socket (3) (
)LJ
).
ATTENTION:
You are advised to always wear protective
gloves, to avoid the risk of serious injury to your hands
.
ATTENTION
: To prevent damaging the power cable,
disconnect the plug from the mains socket by directly pulling
the plug and not the cable.
2. Turn the handlebar to the vertical position, press the uncoupling
lever (4) (
)LJ
) and turn the handlebar to the vertical position
(
)LJ
). When the handlebar is vertical, release the uncoupling
lever (4).
AT THE END OF THE WORK
ATTENTION
: During this operation, do not rest your foot on
the appliance.
3. Tip the appliance back and take it to the maintenance
area and carry out all the procedures listed in the section
“
RECOMMENDED PERIODIC MAINTENANCE
” indicated in the
column “AT THE END OF THE WORK”.
4.
2QFHWKHPDLQWHQDQFHZRUNLV¿QLVKHGWDNHWKHDSSOLDQFHWRWKH
designated machine storage place.
ATTENTION
: Park the appliance in an enclosed place, on a
ÀDWVXUIDFHQHDUWKHDSSOLDQFHWKHUHPXVWEHQRREMHFWVWKDW
could either damage it, or be damaged through contact with it.
1. If you intend to use the spray system, operate the lever of pump control switch (8) on the control
handlebar.
ATTENTION:
Pushing the lever (8) forwards starts the pump in intermittent mode (
Fig.7
).
ATTENTION:
Pushing the lever (8) backward starts the pump in continuous mode.
2. Push the machine with the brush rotating from left to right or vice versa.
3. Immediately afterwards, push the machine in the same way but in the opposite direction, so that
about one quarter of the working width overlaps the previous one.
4. We recommend that you vacuum up the dirt-loaded foam at intervals with the aid of a vacuum cleaner
for liquids (optional solution tank kit).
ATTENTION:
7KH¿UVWWLPHDQRSHUDWRUXVHVWKHPDFKLQHKHVKHVKRXOGEHFRPHIDPLOLDUZLWKWKH
PRYHPHQWVWREHLPSDUWHGWRWKHVKDIWLQRUGHUWREHFRQ¿GHQWHQRXJKZLWKWKHGLUHFWLRQDOLW\RI
movement of the machine, and should therefore not operate the machine near people or
obstacles.
ATTENTION:
Work in slow movements to the right and left, possibly moving back so that the
RSHUDWRUDOZD\VVWDQGVRQDQDUHDRIWKHÀRRU\HWWREHFOHDQHGXS
ATTENTION:
Keep the power supply cable behind the operator, taking care not to operate the
machine in its vicinity in order not to damage it.
ATTENTION:
'RQRWLQVLVWWRRPXFKRQWKHVDPHDUHDVRDVWRDYRLGGDPDJLQJWKHÀRRUDOVRLQ
IXQFWLRQRIWKHW\SHRIEUXVKRUDEUDVLYHÀRRUSDGFKRVHQ
ATTENTION:
If you need to work in tight spaces you can turn the control column to the vertical
position.
7
32
1
2
3
4
1
2
3
Summary of Contents for ROS 17 ORB 115V
Page 2: ......
Page 3: ...ITALIANO 1 ENGLISH 19 ESPAÑOL 37 FRANÇAIS 55 IT EN ES FR ...
Page 76: ......