Parts and Instruction Manual
Page 2
Proper Use
The Kleen Sweep 35W vacuum sweeper has been designed exclusively for sweeping floor surfaces,
including production facilities, warehouses, parking areas, and pedestrian areas, to collect dry and moist
matter. Whatever sort of use beyond the specified range will be deemed improper use; the manufacturer
cannot be held liable for consequential damage. The term of proper use also includes compliance with the
manufacturer’s instructions about operation, maintenance and repair. The Kleen Sweep 35W may be used,
serviced and repaired by persons only that are familiar with the machine and are aware of possible hazards.
Inspection
Carefully unpack and inspect your Kleen Sweep 35W for shipping damage. Follow unpacking instructions
on shipping pallet. Each unit has been tested and thoroughly inspected before shipment. Any damage is the
responsibility of the delivery carrier who should be notified immediately.
Electrical
This machine is battery operated and designed to operate on 12 volts DC (2) 6-volt batteries.
Batteries
The recommended batteries are rated 275Ah (Minuteman P/N 956740).
We do not recommend mixing AMP hour capacities. Any alternate battery sets can be used if they equal
physical size and capacity.
Operator Responsibility
Read this manual carefully before operating this machine.
The operator is responsible in taking care of the daily maintenance and check ups of the machine to keep it
in good working condition. The operator must inform the service mechanic or supervisor when the
scheduled maintenance intervals are required as stated in the
MAINTENANCE
section of this manual.
Special Instructions for Handling Batteries
Never leave batteries in discharged condition for an extended period of time, but re-charge them as soon as
possible. In order to preclude risks to health, eating, smoking and drinking are forbidden in battery charging
stations and rooms. Satisfactory ventilation must exist in the battery charging area. Batteries must not be
connected to or disconnected from the power
supply as long as they are energized. Top up using
distilled water only. Never add battery acid when the cells are in good condition. To avoid leakage
currents, make sure that the batteries are always kept in dry and tidy condition. Protect them
against dirtiness, e.g. by metallic powder. Do not put metallic objects or tools on the batteries. Risk
of short circuits and fuming-off! When handling batteries, wear appropriate protective garments
such as protective gloves and finger-stalls. In particular when checking the acid density, do not use
any open flames (danger of explosion
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
