Parts and Instruction Manual
Page 9
Replacing the Side Broom V-Belt
•
Tilt the Kleen Sweep 35W back on its handlebar (refer to section, “Replace Broom Roller”)
•
Remove hood (3 ea. Screws)
•
Lift side broom and uncock round belt
•
Remove round belt and assemble new one.
•
NOTE
: Refer to direction arrow.
4 Round belt
5 Pulley
1. Filter Module
2. Straps
•
Disconnect Power
•
Remove dirt hopper
•
Unhook straps (2) at top end and remove filter module (1)
•
Carefully shake filter clean or clean with vacuum cleaner (do not damage filter element)
•
Re-assemble filter module in true position (arrow towards machine) and re-attach straps
•
Install dirt hopper
Filter System – Dust Extractor
fine dust in the broom housing is suctioned through a filter module by the dust extractor fan.
The filter module (1) is located in the rear part of the machine and is removed as follows:
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
