Parts and Instruction Manual
Page 10
Clean Motor, Check
carbon brushes for ease
of movement and wear,
clean as required
Check dirt hopper lock
Check dust extractor fan
and flap for function
Check dust extractor and
filter system for good
seal, replace as required
Check traction drive
control cable, adjust as
required
Check drive belts for
wheel, extractor fan,
broom roller and side
broom for appearance
and wear, adjust tension
or replace as required
Check all sealing strips
for appearance, replace
as required. Strip tips
should slightly tough the
floor; adjust as required
Check sweeping track
width, adjust as required
Charge Batteries
Check broom roller and
side broom for wear and
foreign matter (e.g.
Tape, Wire), replace as
required
Empty dirt hopper, clean
the guide edges inside
the chassis
200
100
50
Per Service Hours
Daily
Clean Motor, Check
carbon brushes for ease
of movement and wear,
clean as required
Check dirt hopper lock
Check dust extractor fan
and flap for function
Check dust extractor and
filter system for good
seal, replace as required
Check traction drive
control cable, adjust as
required
Check drive belts for
wheel, extractor fan,
broom roller and side
broom for appearance
and wear, adjust tension
or replace as required
Check all sealing strips
for appearance, replace
as required. Strip tips
should slightly tough the
floor; adjust as required
Check sweeping track
width, adjust as required
Charge Batteries
Check broom roller and
side broom for wear and
foreign matter (e.g.
Tape, Wire), replace as
required
Empty dirt hopper, clean
the guide edges inside
the chassis
200
100
50
Per Service Hours
Daily
Maintenance
Compliance with our recommended maintenance and service schedule will guarantee a dependable
machine all the time. It is better and cheaper to take precautions instead of facing costly repair work. If
your in-house facilities are unable to perform the work per maintenance schedule, your authorized
distributor will be glad to conclude a maintenance agreement with you. For all inquiries or parts orders,
always specify chassis and motor numbers as printed on the data plate. The data plate is located on the
left side under the hood of the handlebar. When performing cleaning or service work or replacing parts,
stop the motor, pull ignition key and disconnect the power. Use adequate tooling for maintenance,
servicing and adjustment jobs only. As far as safety is concerned, spare parts will at least be of the same
quality as genuine parts. When working on the electrical system, disconnect battery plug.
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
