3. E.C.M. (E.K.C.)
A-9
A
p
p
end
ix
How to access the ECM setting mode
Procedure
1. Touch “[4] E.C.M. function setting” on the Key operator mode menu screen.
The Enter E.C.M. master code screen is displayed if a code is required.
2. Use the keypad on the touch screen to enter your 8-digit E.C.M. master key
code, and then touch [OK] to display the E.C.M. setting menu screen. (See
note.)
3. Select the desired E.C.M. function, and then make settings as required.
4. To exit the E.C.M. mode, touch [PREVIOUS SCREEN] on the E.C.M. setting
menu screen, and then touch [PREVIOUS SCREEN] on the Key operator mode
menu screen to restore the basic screen.
NOTE
If an invalid E.C.M. master key code is entered, continue by entering the valid 8-
digit code. The E.C.M. master key code can be set to less than 8 digits with the
Memory switch setting of the Key Operator function.
C4027P219CA
C4027P220CA
C4027P221CA
Key Operator Mode Screen
ECM Master Key Code Screen
ECM Setting Menu Screen
Summary of Contents for PCL6
