manualshive.com logo in svg

Minolta PAGEWORKS 8E, User Manual, Page: 8 / 255

Share
Download
Minolta PAGEWORKS 8E User Manual Download Page 8

vi

Foreword

Welcome

And thank you for selecting a Minolta PageWorks 8e Printer! 

This User’s Manual explains the functions of the printer and how it oper-
ates. It also provides you with troubleshooting tips as well as general pre-
cautions you should observe when operating the printer. To ensure the top
performance and effective use of your printer, read this manual carefully
from cover to cover, and keep it at hand for later reference.

No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into other languages without the
express written prior consent of Minolta Co., Ltd.

The contents of this manual are subject to change without notice. 

Trademark Acknowledgements

LaserJet 6P and PCL are registered trademarks of Hewlett-Packard Com-
pany.

Centronics is a registered trademark of Centronics Inc.

MS-DOS, Microsoft, and Windows are registered trademarks of
Microsoft Corporation.

IBM is a registered trademark of International Business Machines Corpo-
ration.

PageWorks is a trademark of Minolta in the U.S. and Canada.

All other brand or product names are trademarks or registered trademarks
of their respective companies or organizations.

PageWorks.book  Page vi  Tuesday, April 21, 1998  3:55 PM

Summary of Contents for PAGEWORKS 8E
































































































































































































































































Reviews:

No comments