manualshive.com logo in svg

Minolta PAGEWORKS 8E, User Manual, Page: 6 / 255

Share
Download
Minolta PAGEWORKS 8E User Manual Download Page 6

iv

Foreword

This device must be used with a shielded interface (Parallel) cable. The
use of non-shield cables is likely to result in interference with radio com-
munications and is prohibited under FCC rules.

The design and production of this unit conform to FCC regulations, and
any changes or modifications must be registered with the FCC and are
subject to FCC control. Any changes made by the purchaser or user with-
out first contacting the manufacturer will be subject to penalty under FCC
regulations.

USER INSTRUCTIONS (For Canada Users)

INTERFERENCE-CAUSING EQUIPMENT STANDARD 
(ICES-003 ISSUE 3) WARNING

This Class B digital apparatus complies with Canadian ICES-003. 

Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.

PageWorks.book  Page iv  Tuesday, April 21, 1998  3:55 PM

Summary of Contents for PAGEWORKS 8E
































































































































































































































































Reviews:

No comments