Minolta PAGEWORKS 8E User Manual Download Page 229

Page: 229 / 255

7-11

Print Quality Problems

oub

lesho

ting

apter

Blurred background

• The toner cartridge may be

defective.
Remove the toner cartridge and
check it for damage. Replace the
toner cartridge if necessary
(page 6-1).

Uneven print density

• The toner may be unevenly dis-

tributed inside the toner car-
tridge.
Remove the toner cartridge and
rock it left and right a few times
to distribute remaining toner.

• The drum cartridge may be

defective.
Remove the drum cartridge and
check it for damage. Replace the
drum cartridge if necessary
(page 6-6).

Irregularities

• The paper may have absorbed

some moisture due to high
humidity or because of direct
contact with water.
Since toner will not adhere well
to wet paper, replace the paper
you are using with dry paper and
try printing again.

PageWorks.book Page 11 Tuesday, April 21, 1998 3:55 PM

Summary of Contents for PAGEWORKS 8E
































































































































































































































































Search results

Summary of Contents for PAGEWORKS 8E

Reviews:

Related manuals for PAGEWORKS 8E

Brands by name

Popular brands

Minolta PAGEWORKS 8E, User Manual

Search results

Summary of Contents for PAGEWORKS 8E

Reviews:

Related manuals for PAGEWORKS 8E

Brands by name

Popular brands