manualshive.com logo in svg

Minolta PAGEWORKS 8E, User Manual, Page: 183 / 255

Share
Download
Minolta PAGEWORKS 8E User Manual Download Page 183

5-1

Introduction

Using

 MLT Pag

e

Wor

k

s 8 To

ols

Ch

ap

te

r 5

Introduction

This chapter describes how to start up and use the Status Display, 
which keeps you informed of the status of the printer at all times, and 
the Control Panel, which you can use to check and change the current 
settings of the printer. The Status Display and Control Panel features 
are not supported under Windows NT4.0, NT3.51.

Important!

Starting Up the Status Display

The procedure you should use to start up the Status Display depends 
on whether you are running Windows 95 or Windows 3.1.

Note

• In order for the Status Display and Control Panel to operate correctly, 

the printer must be connected to your computer and turned on. 
Otherwise, the Control Panel refuses to start up and the Status Display 
shows an error message.

• If you checked “Setup to start Status Display automatically” when you 

installed PageWorks 8e Printer Software, the Status Display will start up 
automatically each time you start up your computer.

PageWorks.book  Page 1  Tuesday, April 21, 1998  3:55 PM

Summary of Contents for PAGEWORKS 8E
































































































































































































































































Reviews:

No comments