Minolta PAGEWORKS 8E User Manual Download Page 142

Page: 142 / 255

4-68

Using the Minolta PageWorks 8e
Printer Driver Under Windows

Printer Driver

Chap

r 4

Note

Common Buttons

The following buttons appear at the bottom of all the tabs.

Click to exit the dialog, saving any changes made.

Cancel

Click to exit the dialog, discarding any changes made.

Set Default

Click to return most printer driver values to their default values.

Help

Click to view on-line help.

About

Click to view copyright and version information.

• The following information is common to both the standard and

enhanced versions of the Windows 95 PageWorks 8e driver and the
Windows 3.1 driver unless otherwise noted.

• See “Using the PageWorks 8e Enhanced Driver Setup Dialog” on page

4-78 for additional settings included in the Windows 95 enhanced ver-
sion.

PageWorks.book Page 68 Tuesday, April 21, 1998 3:55 PM

Summary of Contents for PAGEWORKS 8E
































































































































































































































































Search results

Summary of Contents for PAGEWORKS 8E

Reviews:

Related manuals for PAGEWORKS 8E

Brands by name

Popular brands

Minolta PAGEWORKS 8E, User Manual

Search results

Summary of Contents for PAGEWORKS 8E

Reviews:

Related manuals for PAGEWORKS 8E

Brands by name

Popular brands