manualshive.com logo in svg

Minolta Di200, Advanced Information

Share
Download
Minolta Di200 Advanced Information Download Page 55

Getting to Know Your Copier

2

Di200

2-39

WARNING

Toner can be hazardous to your health!
Toner is harmful if swallowed.

§

If you get any toner on your hands, immediately wash them thoroughly 
with soap and cold water.

§

Do not drop the toner bottle from a height of more than 1 m. This may 
damage the toner bottle. Toner may escape from the bottle.

1

Swing the cover for the toner unit 
down.

2

Carefully pull the toner bottle out.

?

Is the bottle stuck or hard to pull 
out?

The cover for the toner unit 
opened while the toner bottle 
was turning.

§

Close the cover. Wait until the 
toner bottle stops turning. Then 
you should be able to remove the bottle.

3

Tap the new toner bottle against a 
hard surface to loosen any clumps 
of toner.

Summary of Contents for Di200



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands