Minolta Di200 Advanced Information Download Page 179

Page: 179 / 250

Utility

Di200

5-39

Setting up Administrator Numbers

(Only possible if the “100 accounts“ option is set.)

Set up Access numbers for Copy Track. Use access numbers to record
copies based on projects or cost centres.

Call up the “Copy Track Data“.

For more information, see page 5-37.

Touch the key of a count group.

The display will change.

Press one of the keys under “No“.

Press the [C] key on the control
panel to delete a value that you no
longer need.

Input a 4-digit access number using
the keypad.

Did you enter an incorrect
number?

Press the [C] key on the control
panel. Enter the access number
again.

If necessary, make additional
settings for other counters.

Summary of Contents for Di200



























































































































































































































































Search results

Summary of Contents for Di200

Reviews:

Brands by name

Popular brands

Minolta Di200, Advanced Information

Search results

Summary of Contents for Di200

Reviews:

Brands by name

Popular brands