manualshive.com logo in svg

Minolta Di200, Advanced Information

Share
Download
Minolta Di200 Advanced Information Download Page 175

Utility

5

Di200

5-35

Turning on the Copy Counter

The Copy Track Administrator function is used to record copies based on 
projects or cost centres. You can set up to 100 individual administrator 
numbers on the copier.

When the administrative counter function is enabled, the copier is 
available only after entering a valid access number.

1

Press the [UTILITY] key on the 
control panel.

The Utility screen appears.

2

Press [ADMIN. MANAGEMENT].

The display will change.

3

Input the 8-digit administrator code 
using the keypad.

The administrative management 
functions are displayed.

Note the following important information!

These functions/counters are available:

100 accounts:

• Access number
• Total Counter
• Size counter
• Copy limits (Copy limitation)
• Access code (Administrator code)

Summary of Contents for Di200



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands